dmesg - Intel HD 3000
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-43-generic (buildd@tipua) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #72-Ubuntu SMP Mon Dec 8 19:35:06 UTC 2014 (Ubuntu 3.13.0-43.72-generic 3.13.11.11)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000aabcffff] usable
BIOS-e820: [mem 0x00000000aabd0000-0x00000000aacf6fff] reserved
BIOS-e820: [mem 0x00000000aacf7000-0x00000000aacf8fff] usable
BIOS-e820: [mem 0x00000000aacf9000-0x00000000aadb7fff] reserved
BIOS-e820: [mem 0x00000000aadb8000-0x00000000aadc7fff] usable
BIOS-e820: [mem 0x00000000aadc8000-0x00000000aade7fff] reserved
BIOS-e820: [mem 0x00000000aade8000-0x00000000aaf18fff] usable
BIOS-e820: [mem 0x00000000aaf19000-0x00000000aafe7fff] ACPI NVS
BIOS-e820: [mem 0x00000000aafe8000-0x00000000aaffcfff] usable
BIOS-e820: [mem 0x00000000aaffd000-0x00000000aaffffff] ACPI data
BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff980000-0x00000000ffbfffff] reserved
BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000024fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: ASUSTeK Computer Inc. N43SL/N43SL, BIOS N43SL.414 11/17/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x24fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FE0000000 write-back
2 base 0A0000000 mask FF8000000 write-back
3 base 0A8000000 mask FFC000000 write-back
4 base 0AB000000 mask FFF000000 uncachable
5 base 100000000 mask F00000000 write-back
6 base 200000000 mask FC0000000 write-back
7 base 240000000 mask FF0000000 write-back
8 base 24FE00000 mask FFFE00000 uncachable
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2560MB, range: 128MB, type WB
reg 3, base: 2688MB, range: 64MB, type WB
reg 4, base: 2736MB, range: 16MB, type UC
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 1GB, type WB
reg 7, base: 9GB, range: 256MB, type WB
reg 8, base: 9470MB, range: 2MB, type UC
total RAM covered: 8110M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 4M num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2560MB, range: 128MB, type WB
reg 3, base: 2688MB, range: 32MB, type WB
reg 4, base: 2720MB, range: 16MB, type WB
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 1GB, type WB
reg 7, base: 9GB, range: 256MB, type WB
reg 8, base: 9470MB, range: 2MB, type UC
e820: update [mem 0xab000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xaaffd max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcc70-0x000fcc7f] mapped at [ffff8800000fcc70]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x24fc00000-0x24fdfffff]
[mem 0x24fc00000-0x24fdfffff] page 2M
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x24c000000-0x24fbfffff]
[mem 0x24c000000-0x24fbfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x24bffffff]
[mem 0x200000000-0x24bffffff] page 2M
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x3fffffff]
[mem 0x20200000-0x3fffffff] page 2M
init_memory_mapping: [mem 0x40200000-0xaabcffff]
[mem 0x40200000-0xaa9fffff] page 2M
[mem 0xaaa00000-0xaabcffff] page 4k
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
init_memory_mapping: [mem 0xaacf7000-0xaacf8fff]
[mem 0xaacf7000-0xaacf8fff] page 4k
init_memory_mapping: [mem 0xaadb8000-0xaadc7fff]
[mem 0xaadb8000-0xaadc7fff] page 4k
init_memory_mapping: [mem 0xaade8000-0xaaf18fff]
[mem 0xaade8000-0xaaf18fff] page 4k
init_memory_mapping: [mem 0xaafe8000-0xaaffcfff]
[mem 0xaafe8000-0xaaffcfff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
RAMDISK: [mem 0x35b4c000-0x36d9dfff]
ACPI: RSDP 00000000000f0430 000024 (v02 _ASUS_)
ACPI: XSDT 00000000aaffee18 00006C (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
ACPI: FACP 00000000aaf9bd98 0000F4 (v04 _ASUS_ NoteBook 06222004 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20131115/tbfadt-395)
ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0xAAFE5E40/0x00000000AAFE5D40, using 32 (20131115/tbfadt-522)
ACPI: DSDT 00000000aaf7c018 00D680 (v01 _ASUS_ NoteBook 00000000 INTL 20091112)
ACPI: FACS 00000000aafe5e40 000040
ACPI: APIC 00000000aaffdf18 0000CC (v02 _ASUS_ NoteBook 06222004 MSFT 00010013)
ACPI: HPET 00000000aafe6d18 000038 (v01 _ASUS_ NoteBook 06222004 AMI. 00000003)
ACPI: ECDT 00000000aafe5b18 0000C1 (v01 _ASUS_ NoteBook 06222004 AMI 00000000)
ACPI: MCFG 00000000aafe6c98 00003C (v01 _ASUS_ NoteBook 06222004 MSFT 00000097)
ACPI: SSDT 00000000aaf7b818 000799 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
ACPI: SSDT 00000000aaf7a018 000996 (v01 PmRef CpuPm 00003000 INTL 20091112)
ACPI: SLIC 00000000aaf9cc18 000176 (v01 _ASUS_ Notebook 06222004 ASUS 00000001)
ACPI: SSDT 00000000aaf5ea98 0002EF (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000024fdfffff]
Initmem setup node 0 [mem 0x00000000-0x24fdfffff]
NODE_DATA [mem 0x24fdf3000-0x24fdf7fff]
[ffffea0000000000-ffffea00093fffff] PMD -> [ffff880247400000-ffff88024f3fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x24fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x3fffffff]
node 0: [mem 0x40200000-0xaabcffff]
node 0: [mem 0xaacf7000-0xaacf8fff]
node 0: [mem 0xaadb8000-0xaadc7fff]
node 0: [mem 0xaade8000-0xaaf18fff]
node 0: [mem 0xaafe8000-0xaaffcfff]
node 0: [mem 0x100000000-0x24fdfffff]
On node 0 totalpages: 2074309
DMA zone: 64 pages used for memmap
DMA zone: 157 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 10853 pages used for memmap
DMA32 zone: 694568 pages, LIFO batch:31
Normal zone: 21496 pages used for memmap
Normal zone: 1375744 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 12 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
PM: Registered nosave memory: [mem 0xaabd0000-0xaacf6fff]
PM: Registered nosave memory: [mem 0xaacf9000-0xaadb7fff]
PM: Registered nosave memory: [mem 0xaadc8000-0xaade7fff]
PM: Registered nosave memory: [mem 0xaaf19000-0xaafe7fff]
PM: Registered nosave memory: [mem 0xaaffd000-0xaaffffff]
PM: Registered nosave memory: [mem 0xab000000-0xaf9fffff]
PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
PM: Registered nosave memory: [mem 0xe4000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
PM: Registered nosave memory: [mem 0xff980000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffd7ffff]
PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88024fa00000 s82304 r8192 d24192 u131072
pcpu-alloc: s82304 r8192 d24192 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2041739
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8062344K/8297236K available (7383K kernel code, 1144K rwdata, 3408K rodata, 1336K init, 1444K bss, 234892K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-15.
NR_IRQS:16640 nr_irqs:808 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2294.853 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.70 BogoMIPS (lpj=9179412)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28552 entries in 112 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (18358.82 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xaaf19000-0xaafe7fff] (847872 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 14:47:48, date: 12/18/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000aadcc718 000694 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000694 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
ACPI: SSDT 00000000aadcda98 000303 (v01 PmRef ApIst 00003000 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20091112)
ACPI: SSDT 00000000aadcbd98 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xdc400000-0xdc7fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe03f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf00a000-0xdf00a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdf008000-0xdf0083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xdf000000-0xdf003fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdf007000-0xdf0073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xe0b0-0xe0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xe0a0-0xe0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xe090-0xe097]
pci 0000:00:1f.2: reg 0x1c: [io 0xe080-0xe083]
pci 0000:00:1f.2: reg 0x20: [io 0xe060-0xe07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xdf006000-0xdf0067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xdf005000-0xdf0050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xe040-0xe05f]
pci 0000:01:00.0: [10de:0df4] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xdb000000-0xdbffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xd000-0xd07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdc000000-0xdc07ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff]
pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xddc00000-0xddc0ffff 64bit]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff]
pci 0000:00:1c.1: bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
pci 0000:04:00.0: [1b73:1000] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xdd200000-0xdd20ffff]
pci 0000:04:00.0: PME# supported from D0 D3hot
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff]
pci 0000:00:1c.3: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
pci 0000:05:00.0: [1969:1083] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xdc800000-0xdc83ffff 64bit]
pci 0000:05:00.0: reg 0x18: [io 0x9000-0x907f]
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff]
pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 10 11 12 14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xaabd0000-0xabffffff]
e820: reserve RAM buffer [mem 0xaacf9000-0xabffffff]
e820: reserve RAM buffer [mem 0xaadc8000-0xabffffff]
e820: reserve RAM buffer [mem 0xaaf19000-0xabffffff]
e820: reserve RAM buffer [mem 0xaaffd000-0xabffffff]
e820: reserve RAM buffer [mem 0x24fe00000-0x24fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] could not be reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs ETD0001 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed17fff] could not be reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xafa00000-0xafa00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
system 00:0b: [mem 0x40000000-0x401fffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff]
pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff]
pci 0000:00:1c.1: bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff]
pci 0000:00:1c.3: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff]
pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff]
pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xdb000000-0xdc0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xde600000-0xdeffffff]
pci_bus 0000:02: resource 2 [mem 0xd4200000-0xd4bfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xddc00000-0xde5fffff]
pci_bus 0000:03: resource 2 [mem 0xd3700000-0xd40fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xdd200000-0xddbfffff]
pci_bus 0000:04: resource 2 [mem 0xd2c00000-0xd35fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:05: resource 1 [mem 0xdc800000-0xdd1fffff]
pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18760K (ffff880035b4c000 - ffff880036d9e000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa6bd0000-0xaabd0000] (64MB) mapped at [ffff8800a6bd0000-ffff8800aabcffff]
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1418914069.132:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15783
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90004e80000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC0] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (82 C)
GHES: HEST is not enabled!
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery absent)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xdf008000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-43-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xdf007000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-43-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-43-generic xhci_hcd
usb usb3: SerialNumber: 0000:04:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-43-generic xhci_hcd
usb usb4: SerialNumber: 0000:04:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 55ab2fe28ed5c60df9587150d1734c920ea7b818'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 10:111:789
rtc_cmos 00:05: setting system clock to 2014-12-18 14:47:50 UTC (1418914070)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
systemd-udevd[138]: starting version 204
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006100 irq 41
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006200 irq 41
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
atl1c 0000:05:00.0: version 1.0.1.1-NAPI
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
tsc: Refined TSC clocksource calibration: 2294.786 MHz
ata3.00: ATA-8: ST9500325AS, 0003SDM1, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST9500325AS 0003 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 2:0:0:0: [sdb] Attached SCSI disk
usb 3-1: new full-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=046d, idProduct=c526
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Receiver
usb 3-1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.0/input/input12
hid-generic 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:04:00.0-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.1/input/input13
hid-generic 0003:046D:C526.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:04:00.0-1/input1
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.2: new high-speed USB device number 3 using ehci-pci
random: init urandom read with 72 bits of entropy available
psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040102)
init: plymouth-upstart-bridge main process (206) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
psmouse serio4: elantech: Synaptics capabilities query result 0x78, 0x16, 0x0d.
init: plymouth-upstart-bridge main process (216) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (219) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (222) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (228) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 1-1.2: New USB device found, idVendor=13d3, idProduct=5205
usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1.2: Product: USB2.0 UVC 2M WebCam
usb 1-1.2: Manufacturer: Azurewave
usb 1-1.2: SerialNumber: 0x0001
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input11
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-udevd[340]: starting version 204
random: nonblocking pool is initialized
lp: driver loaded but no devices found
wmi: Mapper loaded
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
cfg80211: Calling CRDA to update world regulatory domain
type=1400 audit(1418910471.943:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=440 comm="apparmor_parser"
type=1400 audit(1418910471.943:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=440 comm="apparmor_parser"
type=1400 audit(1418910471.943:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=440 comm="apparmor_parser"
type=1400 audit(1418910471.943:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=440 comm="apparmor_parser"
type=1400 audit(1418910471.943:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=440 comm="apparmor_parser"
type=1400 audit(1418910471.943:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=440 comm="apparmor_parser"
FS-Cache: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
usb 2-1.2: new low-speed USB device number 3 using ehci-pci
ath: phy0: Enable LNA combining
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
[drm] Memory usable by graphics device = 2048M
checking generic (b0000000 300000) vs hw (b0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900051a0000, irq=17
CIFS VFS: cifs_mount failed w/return code = -101
usb 2-1.2: New USB device found, idVendor=046a, idProduct=0023
usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
i915 0000:00:02.0: irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
Switched to clocksource tsc
[drm] Wrong MCH_SSKPD value: 0x16040307
[drm] This can cause pipe underruns and display issues.
[drm] Please upgrade your BIOS to fix this.
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x1
asus_wmi: SFUN value: 0x1a0af7
input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input14
fbcon: inteldrmfb (fb0) is primary device
asus_wmi: Backlight controlled by ACPI video driver
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Console: switching to colour frame buffer device 180x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
acpi device:4f: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4b/LNXVIDEO:00/input/input15
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:51: registered as cooling_device6
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input16
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \SBGP 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \SBGP 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SBGP 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x40079a2d
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000007
SKU: customization=0x0000009a
SKU: external_amp=0x5
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Internal Mic=0x19
Mic=0x18
realtek: No valid SSID, checking pincfg 0x40079a2d for NID 0x1d
realtek: Enabling init ASM_ID=0x9a2d CODEC_ID=10ec0269
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
init: failsafe main process (815) killed by TERM signal
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
type=1400 audit(1418910473.417:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=931 comm="apparmor_parser"
type=1400 audit(1418910473.417:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=931 comm="apparmor_parser"
type=1400 audit(1418910473.417:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=931 comm="apparmor_parser"
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB2.0 UVC 2M WebCam (13d3:5205)
input: USB2.0 UVC 2M WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input20
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
init: cups main process (933) killed by HUP signal
init: cups main process ended, respawning
input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input21
cherry 0003:046A:0023.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.2/input0
input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input22
cherry 0003:046A:0023.0004: input,hidraw3: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.2/input1
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
atl1c 0000:05:00.0: irq 45 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x1e3 offMax=0xb83
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.16 (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
Non-volatile memory driver v1.3
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1513) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
bbswitch: version 0.7
bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEGR.GFX0
ACPI Warning: \_SB_.PCI0.PEGR.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
bbswitch: detected an Optimus _DSM function
pci 0000:01:00.0: enabling device (0000 -> 0003)
bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEGR.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
wlan0: authenticate with e0:3f:49:0a:2a:80
wlan0: send auth to e0:3f:49:0a:2a:80 (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:0a:2a:80 (try 1/3)
wlan0: RX AssocResp from e0:3f:49:0a:2a:80 (capab=0x411 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
audit_printk_skb: 153 callbacks suppressed
type=1400 audit(1418910503.515:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2650 comm="apparmor_parser"
type=1400 audit(1418910503.515:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2650 comm="apparmor_parser"
type=1400 audit(1418910503.515:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2650 comm="apparmor_parser"
systemd-hostnamed[3515]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[5416]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
ath: phy0: Failed to stop TX DMA, queues=0x005!
ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x000042c0
ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x000042c0
ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Core temperature/speed normal
CPU3: Core temperature/speed normal
CPU0: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature/speed normal
CPU3: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
ath: phy0: Failed to stop TX DMA, queues=0x004!
wlan0: authenticate with 0e:96:d7:b2:c2:52
wlan0: direct probe to 0e:96:d7:b2:c2:52 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: direct probe to 0e:96:d7:b2:c2:52 (try 2/3)
wlan0: send auth to 0e:96:d7:b2:c2:52 (try 3/3)
wlan0: authenticated
wlan0: associate with 0e:96:d7:b2:c2:52 (try 1/3)
wlan0: RX AssocResp from 0e:96:d7:b2:c2:52 (capab=0x431 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA for country: DE
ath: EEPROM regdomain: 0x8114
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: DE
ath: Regpair used: 0x37
ath: regdomain 0x8114 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
CPU3: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU3: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
wlan0: authenticate with e0:3f:49:0a:2a:80
wlan0: direct probe to e0:3f:49:0a:2a:80 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: send auth to e0:3f:49:0a:2a:80 (try 2/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:0a:2a:80 (try 1/3)
wlan0: RX AssocResp from e0:3f:49:0a:2a:80 (capab=0x411 status=0 aid=2)
wlan0: associated
CPU3: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU3: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
systemd-hostnamed[10547]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
CPU3: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU1: Core temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU3: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Package temperature above threshold, cpu clock throttled (total events = 199913)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 199926)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 197142)
CPU3: Core temperature above threshold, cpu clock throttled (total events = 197149)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 199919)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 199926)
CPU3: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU3: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
systemd-hostnamed[29751]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[30837]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!